Sink. Tuesday , January 23rd , 2018 - 19:22:57 PM
Don’t wait too long before you clamp the sink: Place the 2 X 4 on the countertop across the sink and then clamp the sink, when clamping the sink, ensure one end goes through the sinks drain hole and the other end lands on the top of the wood plank.
If boiling water does not unclog your drain, wait for the sink to cool off and then remove the basket drainer. Use a plunger to attempt to clear the clog in the drain. This is best accomplished by using quick, sharp movements with the plunger. This may take several minutes to be successful, so do not give up too easily if you do not unclog the sink right away. If the clog clears, remove it from the sink to the trash can and replace the basket drainer.
At this point, you are done with the installation of the undermount stainless steel. You need to test the sink to be sure you have done the right thing.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Adslo claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.